Browse by Brand Browse by Product Visit Shop

Armeg

111 Reviews
1 Question
Product Information
Overall rating 5.0

Customer Service is rated at a 5/5 for Armeg :

Product Quality is rated at a 5/5 for Armeg :

Product Range is rated at a 5/5 for Armeg :

Value For Money is rated at a 5/5 for Armeg :

Overall is rated at a 5/5 for Armeg :

Reviews
Number reviews: 111
Overal rating: 5
Review for Armeg by ABS Electrics
13th February 2022

Great products, super sharp and the little spring is a great idea, the cut disc pops straight out most of the time, saving time having to get a small driver to peel it out

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Mitie (Mobile Electrician)
13th February 2022

I have been using Armeg stuff for a while now theyre my go to brand for hole saws the part I like the best is the small spring that ejects the cut out part

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by L.c.builders
9th February 2022

All armed tools I own are good quality and well designed I only use there sheet steel holesaws for all my trunking and consumer unit works also have a good value and quality torque set

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Pra Air Conditioning
9th February 2022

All armed bits Ive owned especially the hole saws that click straight into an impact driver they last so long when drilling though Steel and make drilling isolators a breeze

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Watson Electrical Services
5th February 2022

Im a big fan of the angled channelling bit for going behind skirtings and coving. Really hard wearing each bit normally lasts me a few years.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Exceed Electrical Ltd
5th February 2022

We use the 20-125mm hole saw a lot. Pretty much everyday. Always good quality and plenty of work from them before they wear out. The speed cut ones could be cheaper though.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by SPC electrical and property maintenance
1st February 2022

I've always used the yellow brand of cutters but persuade to have a try with these and wow much quicker and better than anything else out there

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by JAM Cabling
30th October 2021

They are not the cheapest, but all my Armeg holesaw last for ages. They leave a nice finish on metal, and never seem to lose a tooth,, unlike the cheap brands.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Rpm Electrical
18th October 2021

All the armeg items I have bought have beem top notch, bit pricey but as a sparky they have so many products that I use almost daily, from the nail proof drill bits to sds chisel bits! saves me hours, wouldn't be without them in my bag.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ches
29th June 2021

Bit expensive spring can be pain there is many on market now but drill can be swopped dont let drill get hot as only brasied in and can drop out

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Bowden Electrical
8th June 2021

Their triple set of steel cutters are invaluable when hole cutting consumer units. Lasts ages and pops the scrap bit straight out. Cuts fast and clean everytime. Highly recommended.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by HB Electrical
4th June 2021

Love the sheet steel holsaws, regularly use 20mm, 25mm and 32mm for glands in day to day commercial electrical work. So much time saved drilling and cleaning out the holesaws with the spring, rather than damaging flat head screwdrivers or undoing the holesaw from the arbor.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by SGKC Electrical
13th May 2021

Great product, I use the holesaws, clean cuts,quick my only gripe with them is the sting doesn’t push out the cut so have to push out with a small screwdriver, price wise good but are higher than others I’ve used but the quality out weighs this

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by A R Keep Electricial Services
29th April 2021

Great products which are built to last. I have the small ratchet set which is top quality. I just wish the product were available at more outlets. I broken one of the multi drill bits and emailed Armeg and they send out a replacement straight away.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by C and O electrical
15th April 2021

Armeg acceler8 holesaw. Can’t recommend them enough. Fast, neat drilling. Pops the cutout itself using a spring. As an electrician They are all I use for 20mm holes

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Keynston Services
6th April 2021

Has anyone else had issues with the Armeg VDE screwdriver set, especially with the small / finer blades?
These two both snapped in the last fortnight. The Sl/Pz +/-1 on its first use, and the Sl 2.5mm on the first day (first 60-90 minutes) of use. They both snapped when trying to undo existing screwhead heads in consumer units I was working on.

I tried contacting Armeg customer service via their website but no-one has responded to my message from last week.

It's no use being VDE to 1000v if the metal doesn't survive contact with a tight fitting.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Salop Gas Heating And Plumbing
4th March 2021

I have had the jaw dropper kit for about 12 years now and have found it to be the best tap tool on the market not cheap but well made and does the job

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Client Secure UK
22nd February 2021

Recently purchased the Armeg SSH3PCSET steel hole saw set after my previous set (different brand) lasted about 3 holes!

This set came recommended by a fellow tradesman and I could instantly tell it was by far a much better build. The saws have gone through sheet metal effortlessly. I now have the Armeg bug.

@clientsecureuk

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by DAJ
22nd February 2021

You’ll pay for quality but they really are one of the better ones out there.

Great selection of chasing tools and breaking.
And the torque screwdriver set is very well made and robust.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by CB Services
18th February 2021

Good quality screw drivers vde insulated sets are top quality and very well priced good case and very well worth the money also armeg snips are toughed steel for getting the job done

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Cw Electrical
16th February 2021

Good quality drill bits that do last long and are very durable, do love the stubby wood bits very handy, great professional service, are expensive but a top product

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Viking Electrical
15th February 2021

Every armeg product I’ve used it top quality, the hole saws are excellent and stay sharp for ages, I also use their extension bar on an almost daily basis it’s the best one on the market in my opinion, you can’t go wrong with a single armeg product in my opinion

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Kevin Saunders Electrics
10th February 2021

Been using Armeg hole saws for a while. Excellent for when drilling out trunking and panels. Not a lot of filing needed plus the self cleaning spring action means the cutter is ready to use straight away

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by R2 Totalsolutions
9th February 2021

Had a few items pretty good quality but they are expensive. Pay for what you get. Although I have had a few drill bits break on me. When they were returned the boots were replaced with no hassle.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by DRM Electrical
9th February 2021

Only really use armeg for holesaws but I can say they hold up pretty well, also drill bits are good aswell not prone to snapping, I do have a long armeg extension that has saved me more times than I can remember so for that you get 5 stars

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Paul Jarvis
9th February 2021

Armeg torque screwdriver great tool great case Armeg torque screwdriver great tool great case Armeg torque screwdriver great tool great case Armeg torque screwdriver great tool great case Armeg torque screwdriver great tool great case what more can I say

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Breach Cottage Services
8th February 2021

Just bought another sds channel chasing tool. Wore the last one out! Expensive but if kit but invaluable when chasing out for trunking/conduit.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Carter Electrical
7th February 2021

Don’t use loads of armed stuff. Cutters mainly but have purchased a 3.5 mm tap nothing else to say need to use 140 characters think I’ve don’t it

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ben Shawyer
7th February 2021

I really liked there screw drivers as they turn screws strongly and don’t snap easily. Ive had them for a while now and i cant stop using them as they are my favourite.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by PeterJ
6th February 2021

Very understated brand, mainly used their drill bits, hole saws. All are to very high standard and seem to out live the rebrandd competition that seems to dominate the market

Always know you're buying quality if you buy armed!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by AMB
5th February 2021

Brilliant brand with great tools wouldn’t use anything else. They don’t feel cheap, would be lost without these tools everyday. Great value for money with massive savings to be found. Customer support is 10/10 emails answered quick and efficiently!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Horsfields plumbing and heating ltd
5th February 2021

Always try and buy Armeg products as they always out perform other makes I’ve tried and used in the past. One brand i trust and use everyday of my working day and intend to keep upgrading from the Armeg brand as it expands.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by E.T Electrical Partners LLP
5th February 2021

I use the small holsaws all the time and they are very good holesaws and there other tools and drill bits are very good as well. I would recommend any of there products.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ormistons
2nd February 2021

They're auger bits are solid, slightly over priced but well worth it. My go to wood bits for first fixing new builds. They don't get on with nails very well though. Haha

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Mill Hill Electrical
31st January 2021

Best ever electrician torque screwdriver set. We bought in the last 2 years 10 sets of 13 pieces Torque Screw Driver set and is a real benefit when working on boards.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Trend Electrical Services
27th January 2021

Well made. Slightly overpriced in my opinion for what you get. We use them for sds 5.5mm bits and chisel bits and we’ve had a spell of the chisels snapping in the drills. Also the flute wood beavers don’t stay sharp for long

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Old Metal Guru
26th January 2021

Their holesaws last forever, well almost. They work well on stainless and ferrous, plenty of cutting oil and take your time. They don't cut bad on wood either.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Cre-electrical
25th January 2021

Have bought the wood stubby drill set good quality and reasonable priced
Easily obtainable from local wholesalers
Would recommend to other electricians

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Apex E C
25th January 2021

I have a set of their acceler8 holesaws and they are the best on the market. I've compared them with other brands using the same style but these last longer and cut cleaner than the others

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Innswood Homes Ltd
21st January 2021

It's the nuts with dealing with plumbing nuts,,, got the jaw dropped use all the time, finding one hundred and forty characters is as pain might end up deleting this childish app

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Wood Electrical
20th January 2021

Ordered a 1200 level from these guys and absolutely love it. Good quality and the extra hand holds make this a pretty good replacement for a stabilia at a fraction of the cost

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by J Noonan Electrical
20th January 2021

Brilliant products, I use them almost daily for cutting trunking, the tops of distribution boards and isolators etc etc, I find that they leave a cleaner cut than most rivals and that they are extremely faster! Great product and will definitely carry on using

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Mys Electrical
20th January 2021

Wouldn't let me write a proper revive as profanity apparently wasn't allowed even though it was completely appropriate and was me saying how much I love their screwdrivers.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Shorter Circuit
19th January 2021

Mainly use their screwdriver bits and holesaws. But recently purchased their pocket socket set. Great products that are robust and stand the test of time. Will definitely replace with same products when reach end of working life.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by D C PLUMBING AND HEATING
18th January 2021

Great kit. I use mostly the 50mm and 30mm core bits. Much faster than dry diamond bits, not found anything it wont bash through yet. They get a lot of use and still look brand new

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by DW Electrics
9th December 2020

Ive been using a holesaw set for a number of years now, and its still going strong
Admittedly the 25mm & 32mm ones dont get as much use as the 20mm one but its out lasted many other brands

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ian Winnard Heating & Plumbing
24th November 2020

We have been using the armeg tap wrench for nearly a year. It does what it says on the tin. Useful for awkward back nuts in tight spots and even use on boiler installs. While the price is premium the tools is good quality.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Lee Butterworth
24th November 2020

I’ve used Armeg tools for over 15 years now, after first buying the square hole drill set for sinking back boxes into plaster, block and brick it’s still works like when I bought it new.

I also a few years afterwards bought the chipboard floor access hole saw kit this make accessing under chipboard floors a dream awesome,

My latest Armeg tool purchase was the twister 16 piece set the SDS bits are very durable and last for ages the best part of the set is the mini hole saws I find them great for brilliant out holes in consumer units for gland bodies perfect

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Jolland Plumbing And Heating
18th November 2020

Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good Very good very good very good

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by A J & C Heating & Plumbing
13th November 2020

I’ve had the bath and tap spanner’s for over ten years, they are still like new in original box. I’ve used them regularly and still going strong. Highly recommended

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ryan B
3rd November 2020

I have used the armeg step down cone cutter, consistent and very accurate holes,
For conduit and trunking works great with very little pressure needed

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Christopher Dench electrical
29th October 2020

I just a rand of bits from armeg from the tri cutter to spring whole saws. You pay a bit more for the one of cost but they latest much longer so I find you get better value for money. Would recommend most of there times and if trying a new produce I will go to armeg for there trusted quality.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Electrical Medic
25th October 2020

A wide range of high quality products available. Not the cheapest of products, but the cost is justified by the build quality and longevity. Highly recommended.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Electrical
20th October 2020

Nice tools! I use the hole saws and they are very good. They cut through metal very well and last for a long time. Durable and cut well. Though they should at the price.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Redpath Instslls
30th September 2020

Armeg 20mm speed hole saw has been used by me for many years and is always reliable and makes light work of steel trunking.
I use their floor hole cutter for accessing floor joists and rodding cables up along floors

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Le Draig Electrical/property services ltd
29th September 2020

Expensive bit of kit . Silverline do a single box cutter that does same job fraction of coat. Ok quality might be different but for price you could use4 of the cheapest one for cost of one armeg

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Skillz Builders
27th September 2020

Use the box sinking kit and the chairing chisel bit, both take some serious abuse. Obviously the box sinker issnt really suitable for very hard materials but for anything else it’s a very quick efficient way to sink a box.
The chasing chisel is great. Very fast, obviously not as neat as using a wall chaser but much faster and less dust.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by abk electrical
27th September 2020

used armegs box sinking kit, very good and takes some serious abuse , got mine on an offer not sure I'd go for one full price though, but usually plenty of offers out there

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Robinson Electrical
26th September 2020

Brilliant place to work and very high quality products just one terrible member of staff... Kath.. Apart from her the whole place is amazing packed with innovative ideas and specialty tools. All in all a great place. Apart from Kath she needs sacking before she ruins the place.....

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Uplands Plumbing & Heating
26th September 2020

Simply amazing brand of hand tools. I personally love their torque screwdriver set. Yes it’s a tad more than other brands but pick one up and you will instantly see the difference. I also have come hole-saw bits from these guys and again top, top quality. In fact I’m yet to see a product from them that is anything but.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by PJH Woodwork
26th September 2020

Very well made and great quality bits and drivers. The impact drill and driver set just works very well and the driver bits fit screws tightly and help avoiding cam out.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ren Electrical
25th September 2020

Nothing beats the armeg holesaws. They are the best holesaws and last at least twice as long as any others! You can buy them from pretty much anywhere and they come nice and packed in a case.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Mps Housing
25th September 2020

Good tools, fair price and lasted a long time
The more you use the tool the better it is and felt like it never let me down.
The only issues I had was the grip on there screwdrivers started to show sign of wear and tear. Not the biggest problem but something to be aware of when buying the set.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by EPC Property Service
25th September 2020

Good quality and very helpful.
Always recommend them to my friends.
Try use their tools on most of my work.
Really like Screwdrivers Torque set which is in my opinion the best on the market.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by AGV Plumbing & Heating
24th September 2020

Armeg beaver drill bits are a game changer when drilling joists! We have tried so many space and auger bits in the past but these drill bits keep pulling even when you hit a nail they don’t seem to go blunt.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Redpath Installs
24th September 2020

I’ve used many Armeg accessories but by far the best one, which I still use, is the cavity floor access tool, cutting a 4inch hole into chipboard flooring and creating a rebate for you to pop a cap straight in, no need to hatch up floors, a lot of time saved

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by MW Electrical
24th September 2020

Brilliant Durability on their tools and accessories! I absolutely love they’re hole-saws which are perfectly designed for drilling Electrical Containment also super fast using them with an Impact Driver!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Sandwich electrical
24th September 2020

All tools are really well built and last for years despite heavy use. I use all the chasing tools which hold up very well and are value for money over the long term.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Cavendish Electrical Services
24th September 2020

I’ve got the back box and wall chasing kit which makes light work of sinking holes for single and double electrical socket back boxes. You can also use the chisel for widening a single hole to make it a double. Has saved me hours of work! My only gripe is the price. It’s £200 at Screwfix but if you were to buy the individual items, you’d be paying even more, so on that basis the kit is a bargain. Recommended!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Anon
24th September 2020

I have the torque driver. Easy to Use and adjust. Bit of a Pain having to carry around the square key to adjust. Have broken a few blades though so could do with improving the quality/ strength.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Electrical & Safety Compliance Solutions Ltd
24th September 2020

Fantatsic quality and well designed, I have the bit set with mini ratchet and could not work without it, comes in really handy to get in tight spaces and undo even the stiffest of fixings

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Reactive Service Solutions Ltd
5th August 2020

Products that never let you down, they are well built and long lasting, compared to others iv used , these are the best and the products keep getting better

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by The Heating Chap Ltd
28th April 2020

I've got myself an Armeg Torque screwdriver set and holesaw kit. Both are and appear to be durable and functional, with the added bonus of satisfying my OCD and matching the colour scheme of my milwaukee kit

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Corelec Ltd
25th April 2020

Hex shank hole saws are a quality product. The only hole saws I use for 20mm & 25mm holes as an electrician I drill countless holes in plastic and metal of these sizes and these holesaws are quick and leave an accurate size hole

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by P J Refurbishments Ltd
1st April 2020

The Armeg Jaw Droppers are and absolute joy to work with. i would recommend to every plumber that is trying to change a bath or basin tap(pillars) to accuire these. great in tight spaces and very easy to use id be lost without mine

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Lc Fisher Electrical Services
25th February 2020

I have a fair bit of kit and I'm not disappointed I think their kit is well made and good quality I would always try to ensure I have it rather than going for a cheaper alternative

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Respond Electrical Services Ltd
16th December 2019

I’ve used there biz cutting kit for a few years now. It does a great job on Breeze Block but struggles but on brick. It’s great unless dust is an issue!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Edwards
12th July 2019

This is getting some real abuse this week, lots of sockets and switches to chip out, we will see how many it manages, I’m usually tired before it is!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by PG Domestic Electrical Services
2nd July 2019

Armeg manufacture some pretty smart products. As a sparky, their box drill and chasers are fantastic. I have absolutely hammered my Tri-cutter and after 5 years service, I finally managed to destroy it! No surprises, I'll be off to Screwfix tomorrow to replace it as it's invaluable!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Green Leaf Electrical Services
10th June 2019

I have an armeg hole saw kit which I use daily. it is simplistic to use and reasonably priced, I would be lost without it. quality seems good

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Hayer Electrical Ltd
10th April 2019

Great quality screwdrivers. Been using for over 2 years and best I’ve used. Better quality that wiha in my opinion. Must have if changing consumer units.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Darkstar Services Ltd
30th December 2018

I’ve got the hole saws for floorboard access and a set of screwdriver bits for use with an impact driver. Absolutely cracking kit and the hole saws in particular are golden for avoiding pulling up full boards and all the hassle of carpet rollback for a full room. All their kit is well made and whilst not the cheapest has earned it’s cost back in time already.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Fitzgerald Electrical & Plumbing Solutions
11th December 2018

Picked up a set of drop jaws, big pricey for what they are but well made and good design, used them already and did the job ! There is quite a range of tools on offer from these guys and all appear to be good, some can be a bit on the pricey side though

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by MJD Electrical
7th December 2018

Started using the small hole saws for cutting mains boards and trunking. Brilliant bits of kit. Especially for the price. Great range of drill bits, hole saws and screwdrivers.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Tun Tech Electrical Ltd
20th November 2018

Innovative high quality tools. Especially like the wood beaver drill bits - fast drilling with little effort, great for arkward joists. The 80mm SDS chisel is great for chasing out for back boxes.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Camlec
30th September 2018

Good for what they offer on accessories, seem to be very good quality. Bit more expensive than some other companies but get what you pay for. Packaging is smart.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Kde ltd
10th December 2017

Amazing bits of kids can't go wrong with the whole saws will cut through anything had a cutter for almost 2 years and still sharp and use daily

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by C & P Waters Property Services Ltd
10th December 2017

Drop jaws are awesome. Had mine for weekday seems like a lifetime. Bought other stuff but whenever i get a problem on taps in hard to get at places these are first on the job. Can't comment too much on customer service as never needed to call them

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by HeatPlumbNI
4th December 2017

Top brand for tool accessories, always look out for this brand as they norm last longer. Maybe a bit more expensive but lasts up to 10 times longer than the cheaper alternative

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Precision Plumbing & Heating
16th October 2017

Quality drilling bits and tools, make a fantastic brick removal tool which is great for getting half bricks out when closing up a flue

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Ethos Heating Ltd
14th October 2017

I use the I get bits red ones are good but the black nail version is better as it does not but straight away

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Summit plumbing and heating ltd
12th October 2017

The jaw droppers are brilliant had mine 5 years now & couldn't live with out them now for boilers, tap changes, & difficult to reach fittings!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Tech Electrical Contractors
11th October 2017

I use there 20mm little cut holes saw they are brilliant good value for money dose what the say on packet and last for ages

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Jm limited
25th September 2017

Had a set of the mini armed holesaws for a while now brilliant design with the lip on them stop them slipping inside Fuseboards if the chuck loosens on the drill unfortunately starting to get a little blunt not but had them some time

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Prenton Plumbing Service Ltd
25th September 2017

I have had a set of jaw droppers for around 19 years wouldn't be with out them
Great for baths basin and old Sink pillar taps good leverage in awkward places

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by M Train Plumbing, Heating & Renewables Ltd
17th September 2017

I have the Armeg Jaw Droppers for bath and basin back nuts. Awesome piece of kit. Helped me out no end.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Enflame Heating and Plumbing
15th September 2017

Love these tools. Quality craftsmen ship and loads of different options for those jobs that have saved me a lot of time.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Concept Systems
26th August 2017

Not dealt with anyone from armed directly apart from reps who always appear helpful. Great range of tools and accessories. Have the wood auger bits that drill through wood and screws, does exactly that without damaging the auger unusable.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Lyttle Smart Homes NI
12th August 2017

Good products have there fibreglass poles and are very flexible but rigid enough to push through tight spaces. Bit on the costly side but better than draper type i had before and hopefully last longer.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by McHugh Plumbing and heatingo
3rd August 2017

I purchased the Jaw Droppers nearly 2 year ago and they are one of the best tools I've bought. I thought they were a pricey at over £50, but to be honest they are worth their weight in gold. Brilliant bit of kit for changing taps. I've given a 3 on customer service as I've not had to deal with them yet so can't rate fully

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Rawfield
3rd August 2017

Best tools I've purchased. Torque screwdriver set. Paid £105. Comes in a quality case. Not the cheapest but you get what you pay for. Calibration cert included.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Dry as a bone
3rd July 2017

Bought the jaw droppers after getting fed up with the normal sprung type tap tool not working properly. Not cheap for what they are but have earned their keep over and over again on tight spaces and difficult to reach places. They've never failed to get a tap connector or back nut undone

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Wellshine
27th June 2017

Customers service great.

Quality very good .

Great Products range .

Value for money very good.
Quality for money.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Clearwater Plumbing & Heating
10th June 2017

Bought the jaw dropper set bit pricey but it is good still awkward behind some baths though may get a socket set type for the tighter areas!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Davidsons Plumbing
3rd June 2017

Picked up the jaw droppers, quite costly however worth every penny, well made and definitely a great addition to the tool bag

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Scotch Street Heating
30th April 2017

I recently purchased a set of jawdroppers and a mini ratchet tool set.

Brilliant! Both are used almost every day!

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Integrated Engineering (SW) Ltd T/A Bristol Gas
16th April 2017

Got the jawdroppers for bath and basin tap changes. Makes the job much easier. Expensive but we'll thought out tool

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Tim Isle Tiling
13th April 2017

I've had their ceramic and porcelain drilling kit for a number of years. Quality is outstanding as you'd expect and drills perfect holes in porcelain tiles. Pricey but worth it

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by Bitz 'n' PC'z Ltd
10th April 2017

I recently discovered Armeg after receiving a free knife from them. This was a top quality item, far superior to the Stanley knives. I have since bought drill bits and have been pleased by the quality. They're not the cheapest, but quality tools are worth paying more for.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by M Brierley Plumbing Limited
5th October 2016

great quality tools.
pricey but worth it

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Review for Armeg by AJOB Electrical Ltd
11th September 2016

Big fan of Armeg, they have some really innovative & useful products in their arsenal.

Customer Service:

Product Quality:

Product Range:

Value For Money:

Overall:

Asked on 15th April 2021 by Cbm Construction

Some really good products out there they can be a bit pricey but everything I’ve purchased are strong and reliable only thing that let them down was the set of vde screwdrivers the pozi drivers don’t seem to fit much apart from the smaller one

Answered on 16th April 2021 by Old Metal Guru

I'm surprised to hear the drivers don't fit. Are they actually made for the screws youre using. I had a bloke get through a couple of dozen impact bits rather than use his own, posidrive screws, using Philips bits, it's easily done.


Recent Conversation

5 days ago

Viessmann

New review by home

1 week ago

FC1

New product release from CT1

3 weeks ago

Wera Tool-Check Plus Tool Set of 39 1/4in Drive

New review by Marwick’s Electrical

3 weeks ago

Makita 18V LXT Impact Driver DTD152Z

New question asked by Hefferson Installations Ltd