Value For Money
Ease Of Use
To publish your review login.
Not a member of Expert Trades? Join over 16,000 trades and unlock deals in Tool Talk now.
Torrington Build & Design -
February 13, 2020 @ 12:42
Review for Erbauer
Replies for Erbauer
Overall a very healthy choice for starting out.
Extremely competitive prices with a wide variety of choice.
Almost every basic tool needed will be available at a price suitable for starting out, apprentices and those who may need tools as an emergency.
Amazing value for money however not the most sophisticated / long lasting.
Diamond Developments & Maintenance LTD -
January 18, 2020 @ 08:43
Erbaeur have a very good selection of tools. Being that they are not meant to be top end of the market, they perform extremely well. I have used almost every power tool they do and am yet to find fault.
Respond Electrical Services Ltd -
December 16, 2019 @ 07:47
Had my tools stolen recently and decided to replace with Erbauer. I’m really impressed so far and the free Bluetooth speaker goes some way to replacing my site radio that was stolen at the same time. Hopefully this brand has a bit less appeal to thieves.
Payne Electrical Services -
December 16, 2019 @ 12:41
Had an Erbauer drill when I first set up for myself which lasted me well over 3 years every day use. Good value for money, and would definitely recommend
PRIME Plumbing & Maintenance -
November 18, 2019 @ 10:10
Can honestly say for the money you pay for this brand you can’t complain at all ,never let me down and why pay a lot more with tool theft at an all time high
Page Maintenance Ltd -
November 7, 2019 @ 04:18
Great value for money , if you want a tool for occasional use this is the brand , spend a bit more if you want it for regular use but for the one off job no issues
AJD Construction -
October 30, 2019 @ 07:35
A cheap and easy to find solution to accessories for a lot of tools. The range is vast and covers all size within your acceaaory range. Tools are cheap too but not made to last.
Absolute Plumbing and Drainage -
October 16, 2019 @ 06:27
I like the brand. It was my first set of power tools when I first started up. Cheaper than other brands but there is a reason for that. With that being said I never had a problem with them. Good cheap way to start out
A J Redgate Carpentry -
August 30, 2019 @ 10:34
I use the hinge router cutter, have been using for years. Very very good.
I’m not so sure about the drill bits. They seem a bit cheap.
I haven’t used the tools.
RS Plumbing & Heating -
August 12, 2019 @ 05:55
These tools are great for the price range. The range of tools is large enough for most light users. Spares for their tools are pretty difficult to get hold of but the longevity of the tools is good for the price. They are budget tools but they do the job.
A Royal Flush Plumbing -
August 4, 2019 @ 08:36
i have a 'cheap' drill set from these. small light but have the power i need and very versatile. loaned them to a friend for a small job his drill gave up on and he was so impressed he has gone and bought the same set. very good value for money and 2 years on very reliable and dont show any sign of issue. more than earned their cost
Lee Key Plumbers -
August 3, 2019 @ 03:50
I don't know if I have just been unlucky but evertime I buy there multi tool cutting blades they either drop to bits or they go blunt just by showing them a piece of timber
He@Heating ltd -
July 30, 2019 @ 09:08
Can’t comment on customer service as haven’t had any need to contact them, unfortunately I’m required to give a rating!
Accessories wise I’m a fan of the multi tool blades and the diamond core drill bits. Multi tool blades are brilliant for the cost alone, they do the same as more expensive blades that are on the market and last just as long, so why pay more. The diamond core bits I’ve had for a number of years and are still going strong
July 12, 2019 @ 11:36
Cheap as chips and solid with it, these get some real abuse on site, 2 year warranty too, no brainer really, especially with van crime so high
B H heating solutions -
June 14, 2019 @ 09:28
Not had to deal with customer service, and not got any of there power tools but there accessories are brilliant for the money got loads and loads of there still bits and last ages if you look after them! Good value for money there hand tools and power tool accessories highly recommend!
Sunderland Property Renovations Ltd -
June 13, 2019 @ 05:10
Have a few Erbauer tools, palm sander, recip saw and a circular saw.
Mainly bought them as I bought they were cheap and disposable and if they lasted me a year I got my monies worth out of them.
All three are still going after the 3 year warranty expired!
S A Sinfield -
March 29, 2019 @ 05:06
Most of my kit is Erbauer, Value for money along with 2 year guarantee does it for me. B&Q are stocking it now, just seen them setting up the display tools today.
March 29, 2019 @ 06:58
I've had an Erbauer impact driver for a few years now, and it's never let me down. Not sure what the model is, but it was about £80 from Screwfix, came with three 2.0 batteries (I think it was on offer at the time), a case, charger, etc. Honestly, this has genuinely been one of the best tools I've bought in terms of cost vs quality. Couldn't be happier with it.
Udell Electrical Services -
March 8, 2019 @ 05:17
I don’t have any of the power tools but use the accessories such as drill bits and hole saws a lot as I find the quality good and they are reasonably priced. They are a good basic brand
February 25, 2019 @ 09:17
All my cordless kit is Makita, however I commented on my dads Erbauer multitool a few years ago having never used one before. He then bought me one for christmas. Its been used day in day out now for over a year and has been an absolute god send. I did check the price of the Makita equivalent and the price difference is significat. The quality of the Erbauer is fantastic and the batteries last plenty long enough!
Thoroughbuild UK Services Ltd -
December 12, 2018 @ 11:24
Good brand. We have quite a few Erbauer tools. These are not too expensive compared to some other brands on the market. Well made and nice quality. I would not hesitate to buy something from this brand.
Damp Specialist and Property Maintenance -
December 10, 2018 @ 02:48
We use the power tools and drill bits, I don't have any complaints, you get what you pay for, they are cheap but always do the job well, 5 start
Gas On Sea Ltd -
December 9, 2018 @ 10:49
I own and use an erbauer battery powered chisel hammer drill for occasional use maybe once per week. Had it for years and Never let me down, surprised this thing is still going
MJD Electrical -
December 7, 2018 @ 04:47
Had a few drill bits and holesaws from them. And actually good quality. Do what it’s supposed to and well priced. Large supply of sizes and lengths
London Construction MK Ltd -
November 27, 2018 @ 03:59
I have a few erbauer tools including a 1/2 inch router, 9 inch disc cutter and sds corded drill. They are great value for money as they are usually cheaper than a lot of the other brands and still give great performance and reliability. Can’t fault the router if I’m honest. Plenty good enough to do worktop joints immaculately
Newport Alarm & CCTV Services -
November 19, 2018 @ 09:15
I like the brand the good thing about this brand they are like a Makita tool if u can’t afford the Makita this is the next level u can go and this tool will not fall on you
BPH - Blakemore Plumbing And Heating -
October 1, 2018 @ 02:27
Bought the 6mm tile but from screwfix for a job recently. Managed to get around 20 holes drilled in porcelain tiles without too much work, would use again.
Jc's green flame -
September 30, 2018 @ 07:10
Only bought the core set fantastic but if kit except for the extension bar which is stuck and can not get it out at all. Tried all sorts so just leave it connected apart from that it never lets me down.
Cliff Plumbing & Heating Limited -
September 11, 2018 @ 08:04
The Erbauer multi tool is a good bit of kit. I do not use it on a daily basis but Comes in handy! The
Erbauer range is great for a budget tool not used constantly... then they can last a while. Would recommend as a starter range of tools or tools not used everyday
Kingston Gas Services Ltd -
July 29, 2018 @ 03:13
I have the Erbauer multi tool and the cordless grinder which uses the same batteries, for a budget power tool they are brilliant, I usually buy De Walt but these tools are only used now and again so saved some money. The batteries last a long time but charge up quick, both tools are easy to use, I would consider other power tools from Erbauer in the future
CCTV INSTALLATIONS -
May 12, 2018 @ 10:01
I bought a jigsaw for around the house jobs and it works a treat most universal blades fot or also would give me faith in their other tools
Hinton Bros -
December 20, 2017 @ 06:44
I have replaced 3 tools now with these,a planer multitool,and an anglegrinder and would recommend them wholeheartedly.A whole lot cheaper than the big brands and they do the job just as good.My only gripe is the planer bag is not quite big enough,not had any problems at all,so why waste extra cash.
Palmer Plumbing & Gas -
October 28, 2017 @ 06:51
I bought an Erbauer angle grinder to replace my old Bosch, it was half the price but to be honest, it's every bit as good. Would definately consider buying another of their power tools.
Precision Plumbing & Heating -
October 16, 2017 @ 11:56
Inexpensive tools and accessories, drill bits are great value and every bit as good as the leading brands
Ultimate Plumbing and Heating Services -
August 26, 2017 @ 11:22
I have an impact driver excellent value for the money does all I need it for and I would buy again .I would look at other products in their range when purchasing again
PSG Northampton -
August 3, 2017 @ 06:19
I have quite a few of these tool great value for money. The only tool I have had issues with was the 1/2 router wasn't powerful enough. The diamond drill bits are fantastic. Overall the products are great
Handy Ben -
July 17, 2017 @ 06:07
I have an erbauer router which I use all the time for worktops. Never missed a beat, great quality deffo would buy again if I should ever need to.
James whitehead plumbing and heating -
June 22, 2017 @ 11:08
I have had a few tools by this brand the stand out tools I've had was an sds 2kg drill and a set of diamond core drills still going strong after 3 years.
PG Plumbing -
June 11, 2017 @ 10:48
My old multi tool died so I bought the erbauer one
To be fair I have t had any problems with it and at a fraction of the price can't grumble
If using everyday then it might be a different story
May 26, 2017 @ 06:19
You get what you pay for really. The drill bits ain't that bad but I would purchase and of the power tools, great for occasional use so perfect for the diy enthusiast.
Fitzgerald Electrical & Plumbing Solutions -
May 21, 2017 @ 07:30
I've used various tooling products from these and found them Reasonable in price compared to the big brands they are sometimes half the price which is great for me! Some last and do the job great others don't last the test of time but when you ain't paying over the odds it's not so bad
HPE Services -
May 15, 2017 @ 06:32
Used a number of bits and blades and found them to be ok, but more diy then trade. Did the job but didn't last as long as I would have liked, but for the price there not bad.
Lock'n'Secure Locksmiths -
May 13, 2017 @ 05:55
Use one of their mini circular saws. Ideal for what I need, cutting OSB board for boarding up damaged doors and/or windows. Seems good value for money although only cuts to a depth of about 20 mm.
Butler Heating -
May 8, 2017 @ 09:23
Brought quite a few drills made by these when we started a new contract. Proof that cheap means cheap. Didn't even last the year before we sent them back under warranty. Didn't over use them, just feel like they are designed more for diy'ers
LMD Gas Engineering -
May 3, 2017 @ 12:53
Use a few bits from them and they seem up to the job. A fair price for a fair tool. Readily stocked and available almost anywhere too.
Gas-Tec Plumbing and Heating -
April 30, 2017 @ 09:37
Have a few bits from these, drill bits and hole saws are resonablely prced and last well. My 1 inch core bit is used regularly and still working well betttr than the Bosch 1 I had before
Sunrise Plumbing & Heating -
April 23, 2017 @ 07:40
Aimed at I would consider medium ranged power tools supplied through Screwfix. Had the multitool cutter which was sound however decided to pass it on to apprentice and purchase the dewalt one (really not much in both are still working doing the same job)
MJS Plumbing, Heating and Maintenance -
April 19, 2017 @ 08:17
Having used someone's impact driver and finding out how good it was, I decided to get one. I opted for the Erbauer one from Screwfix. I have used it on many occasions and have found it reliable in comparison to the Dewalt previously used.
I will probably buy further products when existing tools need replacing.
Electrical Innovations (Derby) Ltd -
April 10, 2017 @ 06:15
Budget gear but seems to be decent enough quality for the stuff I have used. Surprising at how good it is actually.
J.McKie plumbing & heating -
April 6, 2017 @ 12:38
Brilliant Stuff Best going in my opinion wouldn't use out else
Highly recommended To other people Customer service great too
David Banner Joinery -
February 9, 2017 @ 09:29
Great value power tools. I've had several machines from this brand and if you only need a tool for a few specific jobs rather than day in day out use I would recommend this brand. Any issues of fault are sorted by screwfix in the 2 year guarantee period. Overall quality is good enough but accuracy of cuts needs to be checked as some of the guides can be a bit flimsy.
Solar Windows & Conservatories Ltd -
December 20, 2016 @ 05:45
Bought an Erbauer impact driver from Screwfix. Easy to handle and reasonable battery life. Would definitely buy more Erbauer gear
The Plumbing Fox -
October 29, 2016 @ 11:44
Not bad products but big factor for me is the warranties being longer than standard and no quibble replacements or repair. Just what I need to be fair